S35VN Vs S30V:In-depth Review, Features, Similarities, And Differences

For blade enthusiasts, it is quite impossible to stay a day without getting to think about specific details of a particular blade.

There are several varieties of blades out there in the marketplace and it all seems so perfect as you might be so selective when choosing one for yourself.

The S35VN tends to stand out in the market lately and enthusiasts don’t fail to do their job by comparing this particular blade with the S30V.

Today, we are not just going to list them out and create stories about them, we are equally going to specify certain details about them regarding their structure and durability for easy comprehension so if you are a blade enthusiast, this is definitely for you.


Stainless Steel :, S35VN Vs S30V


The S35VN stainless steel is actually something you can’t overlook as it tends to stand out of the crowd. We are going to give a honest review on the steel structure of the S35VN.

The S35VN is a steel that was developed and manufactured in 2009. The steel actually stands to be a modification of the S30V and was actually made to reduce the Vanadium content. However, to increase the quality of the steel, 0.5% was added during its production.


The S30V steel is slightly different from the S35VN steel. The S30V steel contains zero niobium and just 14% chromium so basically, the S35VN steel is actually of more quality than the S30V.

Edge Retention : S35VN Vs S30V


Arguments arising regarding the edge retention of the S35VN and the S30V doesn’t seem to die down lately as it seems that both blades are actually on the same level of edge retention.

Your blade edge retention actually means its ability to retain its sharp edge after beign used over a long period of time and I bet, you wouldn’t want to miss out on that when seeking to purchase a blade.

The S35VN actually contains 14% Carbon and they are being listed as 132 of 58-59 Rc of edge retention.


The edge retention of the S30V is actually listed as 145 of the 58-59 Hrc which tends to be better than the S35VN in terms of edge retention.

Rust Resistance : S35VN Vs S30V


Another important factor about blades is its rust resistance. It can be so annoying to discover that your blade suddenly starts showing signs of rusting due to the inability of using them for over a short period of time.

Below is our own view on the rust resistance of the 2 blades.


The S35VN was actually designed to resist rust as it is enriched with 14.00% and 1.45% chromium solution.


S30V has high Chromium amount of 15% and this amount is higher than what is necessary needed make a steal blade hence making S30V very resistant to rust

Hardness : S35VN Vs S30V


The hardness of the S35VN can’t be overstated as it manufactures did a great job during its production.

The S35VN actually contains 14% Carbon which brands it as an outstanding blade as well as a Hrc of 61 which is a perfect combo for the structure of a blade.

However, if you are of the belief that the S35VN is more hard than the S30V, you might be totally wrong about that.


The S30V is not lacking on this too as it comes along with a Hrc of 61 and a relative CATRA of 149. Now, the S30V is more tough in terms of relative CATRA as the S35VN comes with a relative CATRA of 132.

Toughness : S35VN Vs S30V


The toughness of the S35VN is quite impressive for a knife with the S35VN and a relative CATRA of 132.

A temperature test which was carried out to test the toughness of the S35VN proved that The S35VN tempered at 400 degree F. Furthermore, the steel is laced with 3% Vanadium and 2% Molybdenum which gives it great advantages over other brands.


The S30V contains a 4% Vanadium and a 2% Molybdenum with the Vanadium content giving it a great advantage over the S35VN and this is a great combo for any steel that is to be classified at Tough.

Ductility : S35VN Vs S30V


When using the S35VN, you shouldn’t be overly bothered about the ductility because the manufacturer of the blade actually considered such things during its production. Since it is classified as a blade with a Hrc of 61,you can stretch the blade to an extent without the fear of snapping into 2 different parts.


The S30V on the other hand can also be classified to be safer side in terms of ductility as it equally posses certain chemical combo in its structure that contributes to it ductility.

Sharpness: S35VN Vs S30V


Worried about how sharp the S35VN can be? You won’t be so worried if you know the composition of the S35VN.

The S35VN is of 61 Hrc and it is quite okay for any object which you might want to cut through.

However, since it is between the Rockwell harness of 60-61, they might be quite difficult to sharpen effectively but once they are sharpened effectively , they could last longer.


The S30V on the other hand is also a hard blade to sharpen but retains it sharpness if you eventually sharpen it effectively.

Strength : S35VN Vs S30V


The S35VN is actually created with enough chemicals to strengthen the blade even when it is used under hard conditions. The S35VN is laced with 1.40% of carbon which contributes to its strength.


Laced with 1.45% Carbon, the S30V won’t disappoint on this one as it surpasses the S30V in terms of strength.

Composition : S35VN Vs S30V


The S35VN and the S30V are good blades but they are not just classified as exceptional products because of their brand however, they are classified as such because of their composition.

Below is what makes up the 2 blades respectively.

Chromium10. 5%

Carbon1. 45%
Chromium10. 5%
S30V Steel

Which Is Better? The S35VN Vs S30V?

Several arguments have been against the S35VN and the S30V and enthusiasts are seeking to know which one tends to be more better in all aspect.

Basically, both are quite good blades with nice composition and durability however, it is looking like the S30V tends to be more enriched with more chemical quantity than the S35VN which contributes to its structure.

Furthermore, the prices differs a lot so most people might wish to opt for a blade with a budget friendly price.

Is S30V A Premium Steel?

Yes it is. The S30V is considered a premium steel and is quite expensive to purchase which makes it unique blade.

Does The S30V Chip Easily?

No it doesn’t. The S30V is a high carbon premium steel.

Is The S30V Brittle?

The S30V doesn’t get brittle so easy as you might think. The S30V is a hard blade which don’t get brittle except they are being used for something which is out of place.

An example of something that could get a blade brittle is prying of objects with the blade. Several reports have claimed that the prying could actually make a blade brittle so it is strongly advisable to avoid prying on objects with your S30V.

Which Steel Is More Better Than The S35VN?

Though the S35VN might show superior ease over similar brands of blades however, there are other brands of blade that could surpass its abilities. The S35VN has an improved structure and composition and is quite better than the S35VN.

Does The S35VN Rust Easily?

Notwithstanding the fact that the S35VN is considered a stainless steel doesn’t mean that it doesn’t get rusted easily. It has an impressive rust resistance but will definitely get rust if they are exposed to factors that will make them rust. You should avoid keeping the blade in watery environment and always lubricate them frequently.

Does The S35VN Chip?

No it doesn’t. The S35VN is manufactured by a company that is more interested in the structure of their products hence, the need to keep up to the standard. The presence of Niobium in the composition of this blade makes the blade more resistant to chipping.

Who Manufactures The S35VN?/S30V blades?

The S-series blades were developed and manufactured by crucible industries in Syracuse, New York city. The brand has been in the production of blades for decades. The S35VN as manufactured in 2009 after the S30V.


Both the S35VN and the S30V are good blades as they contain similar composition of chemical as well as abilities.

For enthusiasts, the S30V might be a good buy while I personally believe that both blades are good.

References :